02 March 2014

Did not need bigger hammer

I unpacked the kiln this afternoon and for a while I thought I was going to need a bigger hammer or in this case, mallet!




Why you ask? Well I fired two of my three teapots with the lids on and one with the lid separately and my pottery friends will now know why I needed a mallet..










yes that is right, a tiny little bit of glaze was on the underside of the lid and that is all it takes for a lid to stick!

 Fortunately, with a little persuasion, some boiling water and a firm tap the lid is now free and I will have three teapots to send down to The Studio @ Flinders Melbourne Teapot Show in a week or two..

You might also notice that there are a lot of shelf props in this firing..  a little trick to get the firing even when you don't have enough pots to make a tight pack...

For more pottery studio doings check out Sunday Ceramics here
or Facebook pages such as Mud Colony or Blog Chicks (look for Show and Tell Monday post)

And you can keep up to date with my own Facebook page Anna's Ceramics 

Thanks for stopping by and leave a comment if you like , see you next time..




4 comments:

kim @frogpondsrock said...

I was wondering why the kiln was full of props :)

Anna said...

Hi Kim, some people put an extra un-needed shelf in to keep the firing even but the props seemed to work this time..

Kim Schoenberger said...

10/10 for your gentle hand with the mallot Anna. I have a tea pot garden art somewhere in the garden from a firing many moons ago. Perhaps I should try a gentle mallot tap too, just to see what happens, lol!

Anna said...

Hi Kim
thanks, always worth a try after all that work putting a teapot together... not that I Plan on needing to do it again :)